What is a good RV cam for 350 Chevy?
6 Top Best Stock 350 Chevy Camshafts Comparisons
| IMAGE | PRODUCT | EDITOR’S RATING |
|---|---|---|
| TOP PICK | Comp Cams 12-602-4 Hydraulic Flat Cam | 9.7 |
| Comp Cams Xtreme Energy 242/248 Hydraulic Roller Cam | 9.5 | |
| SB Chevy Hi-Perf RV Cam And Lifter Kit | 9.1 | |
| Lunati Bare Bones Hydraulic Flat Cam | 8.8 |
How much horsepower does an RV cam add?
The RV cam will make 3/4ths the amount of power that a 3/4 cam will. If you really want to kick ass you need a “full race” cam, or 4/4 cam.
How much horsepower can you get out of a Vortec 350?
The ’96-’00 350ci Vortec 5700 engines enjoy lots of aftermarket support to help improve the 255 hp and 330 lb-ft of torque they’re rated for at the crank. An engine swap can be quite costly, so putting even a quarter of those funds into your Vortec 350 engine could get you where you want to be.
How do you size a cam?
Take your digital caliper and measure the smallest diameter on the cam. This is called the base circle. This cam measured at 1.10 inches and 87 thousandths. The next value you will need is the largest diameter on the cam, the lobe part, which is called the base circle and lobe lift.
How to choose the best Cam for 350 with vortec heads?
To begin with, the engine (350 engine type) is one crucial part of your vehicle. If there is a car part to first target to commence with the upgrade, it is the engine. The best cam for 350 with Vortec heads is one of the best investments you would make to advance your engine’s efficacy and, in return, obtain remarkable torque and horsepower gains.
What is the lift duration of a Chevy small block cam?
Cam/Lifter, Valvetrain, Hydraulic Flat Tappet, Advertised Duration 280/280, Lift .480/.480, Chevy Small Block Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 280/280, Lift .480/.480, Chevy, Small Block, Kit
What is the advertised duration of the cam and lifters?
Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 262/270, Lift .462/.469, Chevy, Small Block, Kit
Will vortec heads fit on a 350 TBI?
Probably another question you have, right? The answer is yes, especially for all GEN 1 350 engines. Vortec heads will also fit on a 350 TBI, but the bolting will require a unique intake manifold in this case. How can I get more horsepower out of my 350 Vortec?