What is user EXEC mode?
user EXEC mode is the initial startup mode. A router configuration session can be initiated using terminal emulation programs such as Kermit, HyperTerminal, or telnet. privileged EXEC mode is the system administrator mode.
What is user mode in Cisco?
User Mode is the first mode a user has access to after logging into the router. The user mode can be identified by the > prompt following the router name. This mode allows the user to execute only the basic commands, such as those that show the system’s status.
What are the three modes of router configuration?
Cisco Router modes
- User execution mode – As soon as the interface up message appears and press enter, the router> prompt will pop up.
- Privileged mode –
- Global configuration mode –
- Interface configuration mode –
- ROMMON mode –
How do I get to user EXEC mode?
To return to privileged EXEC mode, enter the end command, or press Ctrl-Z. After you access the device, you are automatically in user EXEC command mode. The EXEC commands available at the user level are a subset of those available at the privileged level.
What does fastethernet0 0 mean?
FastEthernet/0 is up, line protocol is up: this means that the interface is physically up and that the protocol is operational. When you use Ethernet, the protocol is normally up unless you configured port-security or BPDU guard.
What command do you enter to get to the Privileged EXEC mode?
To enter privileged EXEC mode, enter the enable command. Privileged EXEC From user EXEC mode, enter the enable command.
What is Privileged EXEC mode Cisco?
User EXEC level allows you to access only basic monitoring commands; privileged EXEC level allows you to access all router commands. Privileged EXEC level can be password protected to allow only authorized users the ability to configure or manage the router.
Which EXEC mode allows the execution of configuration and management commands?
privileged EXEC mode
The execution of configuration and management commands requires that the network administrator use the privileged EXEC mode or a more specific mode in the hierarchy. This means that a user must enter user EXEC mode first, and from there, access privileged EXEC mode.
Why do you think the commands available in user EXEC mode are limited?
For security purposes, only a limited subset of EXEC commands are available in user EXEC mode. This level of access is reserved for tasks which do not change the configuration of the router, like checking the router status. In order to have access to all commands, you must enter privileged EXEC mode.
What is interface Fa0?
The Fast Ethernet 0 (fa0) interface is an internal connection to the HP Onboard Administrator and is only used for switch management traffic, not for data traffic. It is connected to the Onboard Administrator through the blade server backplane fabric.
What speed is FastEthernet?
100 Mbps
Fast Ethernet (IEEE 802.3u) has a maximum data rate of 100 Mbps and is the first Ethernet standard created specifically to operate in a star wired bus topology.