What is the difference between Seagate Backup Plus and Seagate Portable?
The Backup Plus Slim is the thinner of the two models as it has less storage space, measuring in at 4.5 inches by 3 inches with a thickness of just about half an inch. The Backup Plus Portable is about the same size but it’s close to an inch thick and about twice as heavy (eight ounces vs. four).
Can I use Seagate Backup Plus as an external hard drive?
A: Yes, the hard drive does not require any special software to work. The hard drive can be used as additional storage space to compliment your computer’s hard drive. For example, copy videos, photos, music and documents and then paste them to the Seagate hard drive.
Can you password protect an external hard drive?
When you format an internal or external storage device, you can encrypt and protect it with a password. If you encrypt an internal device, you must enter a password to access the device and its information. If you encrypt an external device, you must enter the password when you connect the device to your computer.
Is WD more reliable than Seagate?
It found that Western Digital’s drives were overall the least reliable. … Toshiba had an annual failure rate of nearly 3.5 percent, Seagate ranked in at slightly more than that but still under 4 percent, and Western Digital topped the charts at just under 7 percent.
How do I transfer files from my Seagate external hard drive to my computer?
Copy and Paste
- Double-click to open the place where the file you want to copy is located.
- Find the file or folder you would like to copy and right-click on it.
- A drop-down menu will appear.
- The file or folder is now copied and held in the computer’s short-term memory.
- Double-click to open (My) Computer/This PC.
Why is my Seagate hard drive not showing up on my computer?
Drive letter – Verify that the drive has a drive letter. If it is missing, verify that other drives have a letter. If other drives have a letter but the external is missing then you can right-click and select change drive letter or path. Click Add then assign a letter and OK.