What PSI is FOX 36?
36 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
How do you adjust a rebound FOX 36?
Use your air pressure to find your rebound setting. Turn your rebound knob to the closed position, clockwise until it stops. Then turn it counter-clockwise to the number of clicks shown in the table below. Rebound controls the rate of speed at which the fork extends after compressing.
How much travel does FOX 36 have?
150 160
FORK BUILDER
| Series | Factory | Performance Elite |
|---|---|---|
| Wheel Size | 27.5 | 29 |
| Travel | 150 | 160 |
| Axle Style | 15QR | Kabolt-X |
| Axle Width | 110 |
How much air should I put in my FOX forks?
To achieve the best performance from your FOX suspension, adjust the air pressure to attain your proper sag setting. Sag is the amount your suspension compresses under your weight and riding gear. Sag range should be set to 15–20% of total fork travel.
Can you lock out a Grip 2 damper?
No, you don’t get a lockout lever like the FIT4 damper, but the way the GRIP2 damper is designed makes it feel, in our opinion, much better than the FIT4 damper when you’re riding terrain that warrants riding a Fox 36 over a Fox 34.
Which is better FOX or RockShox?
Key points when comparing Fox and RockShox – Both Fox and RockShox offer a range of suspension forks from lightweight XC race forks to long-travel downhill forks. – Results: RockShox dominates World Cup XC, while Fox is tops in World Cup DH racing.
Are FOX 36 better than FOX 34?
If your only option is the fit4, the 36 is worth it for the damper alone. The 34 saves a little less than 200g, but I still think thats a very hard sell since the fork doesnt work very well. It is a little meaty, but its still under 2000g (the 36). Its not obscenely heavy or anything, it wouldnt be cumbersome.
How much does the 2016 Fox 36 float fit RC2 weigh?
The 2016 Fox 36 Float FIT RC2 (27.5”) including steer cut to 182mm, star nut and Chris King crown-race, and 3 orange volume spacers installed comes to 2043 grams.
How do I change the travel on my 36 float fit RC2 Fork?
Travel on your 36 FLOAT FIT RC2 170 or 180 mm fork can be changed, by adding or removing air spring travel spacers. After changing travel, check the fork for proper operation before riding.
How do I adjust the air pressure on my Fox Racing Fork?
Attach a FOX Racing Shox High Pressure Pump to the Schrader valve. Using the 36 FLOAT Air Spring Setting Guidelines tablebelow, pump your fork to the appropriate setting using the FOX High Pressure Pump, then remove the pump.
How do I install the Fox Racing Shox high pressure pump?
Attach a FOX Racing Shox High Pressure Pump to the Schrader valve. Using the 36 FLOAT Air Spring Setting Guidelines tablebelow, pump your fork to the appropriate setting using the FOX High Pressure Pump, then remove the pump. Install a zip tie with light friction on the upper tube and push it down until it contacts the fork seal.