How do you calibrate a Bosch laser level?

How do you calibrate a Bosch laser level?

How do you calibrate a Bosch laser?

1. Choose your recalibration site.
2. Turn the tool off.
3. Remove the calibration plug on the side of.
4. Draw a straight line on the ceiling.
5. Turn the tool on.
6. Place the tool on the floor (on its accessory.
7. Align the tool so that the top laser beam hits.

How do you reset a laser meter?

› Press and hold the read button to turn the laser distance measurer on. › Press and hold the off / clear button for 3 seconds to turn the unit off. The device will shut off automatically after 150 seconds without use. › To reset the current unit of measurement press the unit reset / backlight button.

How often should you calibrate a laser measure?

Make sure you purchase a laser level that has had a pre-sale calibration and accuracy check like all IMEX lasers. If used daily, i.e.: concreter or tile, the laser unit should be recalibrated every 6 months, if used once or twice a week, 12 months or even 24 months is acceptable.

Do you need to calibrate a laser measure?

Therefore it is essential to calibrate your laser level to be perfectly level. Even though your laser level might be labeled as “self-leveling,” you still need to check for accuracy every once in a while and adjust. If you find your level is inaccurate, you can calibrate the level yourself to keep it working correctly.

Can you calibrate a laser level?

Though slightly technical, yes, calibrating the laser level is plenty possible to do on your own. If your level is self-calibrating, you will only need tape, possibly with a pen and paper (depending on your preference).

What is the Bosch GLM 80 professional laser rangefinder?

The Bosch GLM 80 Professional Laser Rangefinder is the successor of the DLE 70. It belongs to the product line “blue” or “Professional”, so it is an instrument that is built for craftsmen and professionals. This laser rangefinder comes with some new features that sets it apart from almost all other laser distance measurers.

Is Bosch GLM 80 a good inclinometer?

The Bosch GLM 80 offers an integrated inclinometer and a lithium-ion battery which is much more than the entry-level devices do. The GLM 80 was successful in our test. The measuring range up to 80 meters makes it suitable for large interior rooms.

What is the tolerance of the GLM 80?

GLM 80, it also depends on the accuracy of the tilt measurement. The inclination can be measured over 360 degrees with a tolerance of +/- 0.2 degrees. The GLM 80 holds the ISO 16331-1 standard, which demands a high standard of accuracy.

What is the measuring rail R 60 for the GLM 80 for?

The measuring rail R 60 for the GLM 80 Professional Laser Rangefinder is a really useful addition: Measuring the inclination or the angle but is facilitated and due to the length of a more precise result. as an add-on for the LDM.