What can I put on the wall behind my wood stove?
Common fireproof wall ideas for behind a stove include stone, brick and tiles. The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback.
How do you protect a wall from stove heat?
If your walls are combustible, you can install a shield on a wall to reduce the stove’s clearance area. Like the floor pad, the shield should be made of a noncombustible material, such as sheet metal.
Is drywall OK behind wood stove?
Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.
What is considered a non-combustible wall?
Non-combustible materials are building materials that do not burn or ignite when subjected to expected levels of fire or heat. Examples of non-combustible materials include brick masonry, concrete blocks, hardy backer board, calcium silicate board, cement board, metal, and certain types of glass.
Can cement board be used as a heat shield?
PermaBASE® Building Products are the industry-preferred choice and the only cement board approved for heat shield applications.
What can be used as a heat shield?
By far the most effective heat shields are the air cooled type. These shields are constructed with a sheet of 24 gauge or thicker sheet metal, or 1/2″ or thicker cement board, with 1″ of air space behind the shield and around the perimeter to allow free air flow.
How close to wall can wood stove be with heat shield?
The Fire Protection Association recommends that the common radiant-type stove must be spaced out by 900mm (36 inches) from a combustible wall. Using a heat shield can reduce the space required to 95mm as stated by HETAS.
What kind of wall goes in a wood stove?
Type X drywall is a common material used for wood stove installations. Type X is a gypsum-based drywall that is 5/8 inch thick and is installed on each side of a 2-inch by 4-inch wood stud, spaced 16 inches on center or spaced 24 inches on center.
What material can protect the wall behind a wood stove?
Faux Panels. Faux panels are most commonly faux stone.
Is a fire wall required behind a wood stove?
You must fireproof the wall behind a wood-burning stove for several reasons. First, the floor protection will prevent the wall from getting too hot and potentially burning or fire hazard. This simple protection can save you and your family from a tragedy.
What kind of wall board goes behind a wood heater?
You can easily fireproof the wall behind your wood-burning stove with the help of a fire and heat-resistant material. Of course, you can decide what material works best for you and your room, but the best part is that there are options. Some of the options include brick, stone, faux panels, cement board, and more.
How to build a stone veneer wood stove backing?
– Fireplaces. The facing materials of a fireplace are a perfect place for natural veneer stone, whether you have a traditional wood-burning fireplace, a gas fireplace or a modern electric unit. – Interior walls. – Exterior walls. – Accent walls/panels. – Columns.