How do I reset my admin password Xerox workcentre?

Posted on by Drake Andrew

How do I reset my admin password Xerox workcentre?

Reset Administrator (Admin) Password

  1. Select Device.
  2. Select Tools.
  3. Select Device Settings.
  4. Select General.
  5. Select Feature Installation.
  6. Enter the 12 Digit Reset Code.

What is the default password for Xerox Workcentre?

1111
Login as the Administrator the default user is admin (lower case) the default password is 1111.

How do I reset my Xerox workcentre?

Perform a Software Reset

  1. Press the Log In/Out button on the Control Panel.
  2. Login as the device Administrator (Default Username: admin, Default Password: 1111).
  3. Press the [Machine Status] button on the Control Panel.
  4. Select the [Tools] tab on Touch Screen.
  5. Select the [Troubleshooting] button.
  6. Select the [Resets] button.

What is the default password for Xerox b215?

printer serial number
The default password is the printer serial number. Make sure to enter the entire serial number. The password is case sensitive.

What is Xerox workcentre 6515 default password?

The default password is 1111.

What is the default fiery password?

Fiery.1
IMPORTANT: The Fiery documentation may mention “Fiery. 1” as the default password. Do not use this password when you log on to the Fiery server for the first time. Instead, print a Fiery Server Configuration page and look for ID in the BIOS Setup section (listed under RIP).

How do you clear error codes on Xerox?

Locate the Image Quality button, below the Auto on the Control Panel, toward the left side. Press the buttons in the following sequence within 4 seconds. Press [C] (Clear), press [Image Quality], press [C] (Clear) again, press [Image Quality] again. The error code should disappear.

How do I reset my Xerox Phaser 3250?

Reset the Printer to Factory Defaults

  1. Log in to the control panel as a System Administrator.
  2. Press the Home button.
  3. Touch Device > Resets.
  4. To reset the printer to factory defaults, touch Reset to Factory Defaults.
  5. At the confirmation message, touch Reset.

How long is Xerox lockout?

The default lockout period for Altalink devices is 30 minutes. To adjust adjust his time out see below instructions.