How do I activate Openview decoder online in Zimbabwe?

Posted on by Drake Andrew

How do I activate Openview decoder online in Zimbabwe?

Dial the number on the bottom right-hand corner using a cellphone *120*6843*1# and follow the prompts. Use your STB number to complete your decoder activation.

How much does an Openview decoder cost?

Openview decoder prices start at R599 at leading retail stores nationwide, which is ideal if you already have a satellite dish on IS-20 satellite (pointing North-East).

How do you change OVHD to is20?

The OVHD is20 decoder settings are also similar to users with different satellite models. However, you will need to activate it by dialing *120*6843*1#. It will bring up the setup menu, and you can follow the menu.

How do I activate my OVHD USSD?

Existing Top TV dish: The decoder will pick up the OVHD signal automatically. The decoder must be activated using the cellphone by entering *120*6843*1# and then follow the menu.

How do I use Openview connect?

Insert the “Openview Data Dongle” into the USB of the “Openview Hub”. Go to the Wi-Fi Hotspot dashboards from the settings menu on your Set-Top-Box. Open the Wi-Fi Hotspot status page on your Set-Top-Box, and recharge with data. Connect with your smart devices and enjoy home internet.

How do I reset my Openview decoder in Zimbabwe?

Openview

  1. Press menu from the remote control.
  2. From the screen scroll to setting then press ok.
  3. Under setting go to installation and press ok. Parental pin code will be required, enter 1234.
  4. Scroll down to factory reset and press ok.
  5. Press ok again to start channel search.

How do I get Openview?

Purchase your Openview decoder with an installation voucher (includes dish and installation). Connecting homes that don’t have access to the internet! Purchase your Openview decoder (excludes dish and installation). Purchase your Openview decoder with an installation voucher (includes dish and installation).

Can I use DStv decoder for Openview?

Simply put, if you have an installed dish, that has been used to receive DStv, Freevision, StarSat/Top TV or Vivid, you can now use the same dish to receive OpenView HD.

How do I reset my OVHD decoder?

Go to menu>settings>installations and select factory reset, pin use 0000 or 1234. Alternatively, please dial *120*6843*1# select Option 1, then enter your STB number to reactivate your decoder.

How do I connect my DStv and OVHD to one dish?

Follow these steps to connect your OVhd to DStv:

  1. Provide an OpenView HD decoder.
  2. Connect the satellite dish cable to the LNB-IN port on your decoder.
  3. Turn your OVHD decoder on.
  4. Openview hd full installation guide should be in the decoder’s box which includes how to activate your free entertainment service.