What kind of sander do you use on stairs?

What kind of sander do you use on stairs?

A “hand-held random orbital” is the best hand-held power sander for hardwood stairs because it minimizes the risk of cross-grain sanding scratches. A flat sanding disk spins rapidly while the entire head of the sander revolves. Hold on tight, when you turn the sander on – you’ll feel the circular revolution motion.

What is the best grit for sanding stairs?

How to Sand a Wood Staircase

• Use 60-grit sandpaper on a circular floor sander to remove the initial finish from the center of the wooden stair.
• Sand the outer portions of the stairs and the rise of each step with a small, orbital hand sander using 60-grit sandpaper.

Do I need to sand stair treads before staining?

It is really important to sand stairs with a fine grit sandpaper prior to staining.

Can you stain without sanding?

If the wood has been stained but not finished, DO NOT scuff or sand. Doing so will remove the color from the edges, leaving the project looking uneven.

What sander is best for sanding stairs?

Top 5 Sanders for Stairs Reviews

1. Bosch 3.4-Amp Variable Speed 1/2-Sheet Orbital Finishing Sander. Sheet size:½ sheet, 4 ½” x 9″;
2. Makita Sheet Finishing Sander, 1/3 In, 1.7 A, Teal (BO3710)
3. Makita 2 Amp Finishing Sander.
4. Makita BO5030K 5-Inch Random Orbit Sander.
5. PORTER-CABLE 1/4 Sheet Orbital Finish Palm Sander.

How do you sand old wooden stairs?

Steps to Refinishing Your Stair Treads:

1. Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper.
2. Clean. Vacuum between passes, then wipe down the treads with a tack cloth.
3. Sand again.
4. Clean again.
5. Treat the wood.
6. Stain the treads.
7. Apply the Finish.
8. Sand, then repeat two more times.

How do you finish oak stair treads?

Best Finish for Stair Treads The simplest way to finish oak stair treads is with two coats of clear polyurethane, which enhances both the grain and the natural reddish to goldish tinge of the wood. Bring out further warmth by coating the treads with wood stain before applying poly finish.

How do you stain new oak stair treads?

1. Sand the treads with 100-grit sandpaper.
2. Vacuum the sanding residue from the treads.
3. Stir the can of stain gently with a paint stick.
4. Dip the paintbrush into the stain, and tap the brush on the lip of the can of stain to remove any excess stain from the brush.
5. Apply another coat of stain to the treads.

Is it better to stain wood with a brush or rag?

Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain. Also, the rag leaves a beautiful, even, and brush stroke free finish. It also can easily be thrown out once finished.