Why is my PC stuck on POST screen?

Why is my PC stuck on POST screen?

A misconfigured BIOS is a common cause of a computer locking up during the POST. If clearing the CMOS does fix your problem, make any future settings changes in BIOS one at a time so if the problem returns, you’ll know which change caused your issue. Test your power supply.

Why is my PC not going past the boot screen?

If it is caused by bad memory in the computer or the memory slot on a computer motherboard is bad, you may follow to fix it: Try to change or reinstall the computer and restart the system in safe mode: press F8/Shift on startup. Select Safe Mode and hit Enter. Press Win + R or run MSCONFIG and click OK.

How do you fix a computer that won’t POST?

POST troubleshooting steps

1. Remove new hardware.
2. Remove any disks or USB devices.
3. Disconnect external devices.
4. Reconnect and check power cords.
5. Identify beep code.
6. Check all fans.
7. Check all cables.
8. Disconnect all expansion cards.

How do you get past a BIOS screen?

If the above methods failed, you may need to change the BIOS settings manually.

1. Restart your computer.
2. Press the corresponding button to enter BIOS.
3. Look for the Secure Boot option under Security.
4. Click and disable it.
5. Save changes and exit BIOS.
6. Restart your computer.
7. Enter BIOS again and go to the Boot tab.

What causes POST failure?

A POST failure can be triggered by some reasons, for example, new hardware conflicting with old hardware, failing or bad hardware device, electrical shorts or incompatibilities. If you are encountering this issue, what should you do to get rid of PC not posting?

How do I fix BIOS freeze?

Eliminate your computer’s freezing problems by resetting your BIOS to its default configuration.

1. Restart your computer or start it up.
2. Use the arrow keys on your keyboard to navigate to the “Load Setup Defaults,” “Load Optimized Defaults,” “Reset” or other similarly titled option.

Can CMOS battery cause computer not start?

In conclusion, CMOS battery can cause the computer not to start. It is important to check the CMOS battery status and replace it if needed. CMOS batteries are small and tend to last around two years. If your computer isn’t starting, it’s worth checking the CMOS battery to see if it needs to be replaced.

Can RAM cause no POST?

As the others have said, bad RAM can cause a no POST issue. RAM that’s failed or, for whatever reason incompatible, can cause all sorts of different symptoms. That’s one reason it’s kind of a pain to troubleshoot sometimes. Replace the RAM with known good stuff and see what you get.

What causes no POST?

Stands for Power On Self Test. This happens before the system is turned over to the hard drive, CD-ROM or Floppy when you turn the system on.

How do I fix a stuck ASUS BIOS?

Please turn off the laptop (press and hold the Power button for 15 seconds until the Power light is OFF to force shut down), then press and hold the Power button for 40 seconds to do CMOS reset. Re-install the battery (for removable battery models) and connect the AC adapter, then try to restart your laptop.

How do I bypass UEFI BIOS utility screen?

How do I get out of Asus UEFI BIOS utility? Press F10, Escape, or follow the menus to exit.

What to do when your computer won’t pass post?

If you connected CDs, DVDs or USB devices including iPods, phones, drives, etc. to your computer, disconnect all of them and reboot the computer to see if it can pass POST. Except for the power cable, remove everything from the computer’s back.

Why is my PC not posting?

A POST failure can be triggered by some reasons, for example, new hardware conflicting with old hardware, failing or bad hardware device, electrical shorts or incompatibilities. If you are encountering this issue, what should you do to get rid of PC not posting? Try these methods to easily fix this problem. Let’s see them now.

What happens if the computer does not post to the BIOS?

If the computer doesn’t post, the PC cannot go to the BIOS menu and it is not bootable. To learn more information on power-on self-test, refer to MiniTool’s library – Full Introduction to POST and It’s Different Types of Errors. Why is the computer not posting?

Why won’t my computer boot past Asus screen?

If your computer won’t boot past ASUS screen, there may be a major issue with your machine. It could be due to an issue with your BIOS or the settings files on your computer. Luckily, there are various ways to get around this problem on your ASUS computer and use it normally.