Is SRAM dub same as BB30?

Posted on by Drake Andrew

Is SRAM dub same as BB30?

Before you shake your head and scream at the sky at the prospect of another BB standard, SRAM DUB will fit anywhere existing GXP and BB30 cranks go. DUB will fit your frame.

What cranks work with BB30?

1. Compatibility of bottom brackets

BB standard Crankset compatibility
1 a) BB30 Hollowtech II, BB386EVO,
1 b) BB30A Hollowtech II, BB386EVO, BBright, BB30 if they have spacers on the left side
2. PF30, OSBB Hollowtech II, BB386EVO, OSBB, BBright, BB30
3. BB86, BB90, BB92 Hollowtech II

What type of bottom bracket is a BB30?

The term PF42 refers to the inside diameter of the shell. The term BB30 was an early term in the history of this standard and refers to the 30mm diameter of the spindle used at that time. However, bottom bracket bearings are available in this standard for 28.99mm, 24mm and 22/24mm spindle systems.

What cranks are compatible with SRAM dub?

As such, below is a list of bottom bracket standards that SRAM’s DUB cranks will be compatible:

  • BSA 68 (threaded)
  • BSA 73 (threaded)
  • BSA 100 (threaded)
  • PF89.
  • PF92.
  • PF121.
  • BB30 73.
  • PF30 73.

Will GXP fit BB30?

A GXP bottom bracket will not work on a BB30 frame or any incompatible parts. “GXP” stands for “Giga X Pipe,” while “BB30” is short for “Bottom Bracket.” The “30” indicates the 30-millimeter diameter of the bottom bracket and spindle. SRAM Apex and Red BB are also compatible with this system.

Is BB30 compatible with Shimano?

Our Shimano BB30/PF30 68mm ROAD BB. It is compatible with Shimano™ Hollowtech II cranks. High-grade Enduro 2437 steel bearings are fully sealed and are a fantastic replacement BB for your Shimano™ drivetrain.

What size is a BB30 bottom bracket?

The BB30 bottom bracket shell is typically 68mm (road) or 73mm (mtb) wide with an inside diameter of 42mm. Originally the BB30 system was designed to use 30mm diameter crank spindles.

Is BB30 compatible with dub?

DUB is compatible with BSA threaded, PF86, PF92, BB30 (73mm shell) and PF30 (73mm shell) bottom brackets and cranksets are completely interchangeable between the different standards.