Where does the P9 connector go?
Alternatively referred to as the AT style connector, P8 connector, and P9 connector, the P8 and P9 are IBM power connectors. They connect the power supply to the motherboard on AT, Baby AT and LPX motherboards. The picture is an example of this connector.
What is a P2 connector?
The P2 is a 6-pin connection that uses 4-pins (the other 2 are blank).
What is the name type of power connector used to connect AC power on ATX power supplies?
ATX Main Power Connector The industry standard ATX power-supply–to–motherboard main connector is the Molex 39-29-9202 (or equivalent) 20-pin ATX style connector (see Figure 3.7).
What connector gives power supply to the motherboard?
The ATX 24-pin power supply connector is the standard motherboard power connector in computers today. The connector itself is a Molex 39-01-2240 connector, often called a Molex Mini-fit Jr.
What kind of connectors are used to connect power supply to hard drive?
Connections to Peripheral Hardware Molex connector: This is the most commonly used power connector. It provides both 12-volt and 5-volt power. Hard disk drives, internal tape drives, CD-ROM drives, DVD (digital video disc) drives, and older 5.25-inch floppy disk drives all use this fitting.
What is a SATA connector?
SATA (also referred to as Serial ATA) stands for Serial Advanced Technology Attachment, an industry-standard bus interface for connecting a computer’s host bus adapter to storage devices such as hard disk drives (HDD), optical drives and solid-state drives (SSD).
What is a P4 connector?
The P4 connector is a 12V power supply cable used with motherboards that have an Intel Pentium 4 or later processor. Today, the connector is a standard power connector and is used with both Intel and AMD motherboards.
What is ATX 12V for?
The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.
What are 8-pin connectors for?
What is an 8-pin GPU Cable? 8-pin power connectors are found in high-end graphics cards. 8-pin connectors have 4.2mm pitch and can deliver up to 150 watts, twice the amount that a 6-pin connector is capable of.