How do I format my flash drive to FAT32 in command prompt?

Posted on by Drake Andrew

How do I format my flash drive to FAT32 in command prompt?

Manually forcing Windows to format as FAT32

  1. In the Start menu, type cmd , and then click the entry for the cmd program.
  2. At the command prompt, enter diskpart (you might have to approve this operation as an administrator).
  3. Enter list disk .
  4. Enter select disk X , where X is the number of your selected disk.
  5. Enter clean .

How can format USB drive in CMD?

You can apply CMD to format it with the listed steps here:

  1. Connect the bootable USB drive to your PC.
  2. Open Command Prompt.
  3. Type diskpart and hit Enter.
  4. Type list disk and hit Enter.
  5. Type select disk + number and hit Enter.
  6. Type list volume and hit Enter.
  7. select volume + number and hit Enter.

Can you format any USB to FAT32?

Now you should be able to format a USB drive of any size to FAT32 on Windows 10. And with just a little modification, any of these methods can be used to format your drive to another file system like NTFS or ExFAT.

Why can’t I format USB to FAT32?

☞ The partition that you need to format is larger than 32GB. Windows will not allow you to format partition beyond 32GB to FAT32. If you format the partition in File Explorer, you’ll find that there is no FAT32 option in the Format window. If you format it via Diskpart, you’ll get “The volume size is too big” error.

Why can’t I format my USB to FAT32?

You may find that it just doesn’t give you the option for the FAT32 file system. What leads to the error? The reason is that by default, the Windows File Explorer, Diskpart, and Disk Management will format USB flash drives below 32GB as FAT32 and USB flash drives that are above 32GB as exFAT or NTFS.

How do I format a 1tb hard drive to FAT32?

Select your hard drive in the drives list, right-click on it, and select Format. Set the options as the following and then hit OK. Partition label – enter a name for your drive. File system – select FAT32.

How do I Format a 1TB hard drive to FAT32?

How do I Format a 2TB hard drive to FAT32?

How to format 1TB / 2TB hard drive to FAT32 smoothly?

  1. Install and launch AOMEI Partition Assistant Standard. Right-click the 2TB hard drive and select “Format Partition”.
  2. Choose “FAT32” in the File System drop-down menu.
  3. Back to the main interface, click “Apply” to commit the pending operation.

How do I run chkdsk on a USB repair?

1Using USB Drive Repair Tool – CHKDSK Utility

  1. Step 1: Get Command Prompt opened.
  2. Step 3: chkdsk f: /f /r /x command should be entered.
  3. Step 2: Get the USB device right clicked on.
  4. Step 3: You will be shown a page where there are various options to choose from.
  5. Step 4: Scan and repair drive option should be selected.