How many pins does Molex connector have?
Four-Pin
Four-Pin Molex Connector The most famous of all ‘Molex’ connector configurations may be the four-pin connector, a versatile component that suits many power and IO connector applications.
Are all Molex pins the same?
There are three typical pin sizes: 1.57 mm (0.062 in), 2.13 mm (0.084 in), and 2.36 mm (0.093 in). The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power.
Are Molex connectors still used?
Basically since around 2006 IDE and their molex powered devices are zero. And everything now is now SATA power. Motherboards have no IDE connectors on them no more, and any DVD drives and hard drives you buy all come with SATA power connectors and no more Molex support.
How do I identify a Molex connector?
The Molex connector is one where the male/female terminology is a bit odd. The female connector is usually found on the end of a cable, and it slips inside of a plastic shell which surrounds the male pins on the male connector.
Is Molex better than SATA?
Technically Molex can carry much more power than the SATA power connector. Molex has 2 power pins (one 5V and on 12V pin), each can deliver 11Amps for a total of 22Amps.
Is it safe to use Molex to SATA adapter?
Molex to SATA adapter cables are a very simple and cost-effective alternative to buying a new power supply. However, they can be a dangerous alternative to getting a quality power supply, potentially damaging your SSD, internal components, and may also pose a fire risk in your home.
Is LP4 a Molex?
The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable allows you to position your devices as needed within the system case.
What are 4 pin Molex connectors used for?
The Molex connector is used for power connections for a disk drive in a computer as well as for other computer components such as CD-ROM’s, graphic cards etc. The Molex connectors bring DC power to the drives inside a PC case. One computer can have several Molex connectors.
What is Molex keyed connector?
Often refers to the 4-pin connectors used to attach DC power to the drives inside a PC cabinet. Molex is a large manufacturer of electronics plugs and sockets that dates back to the 1940s.
Can Molex be converted to SATA?
Product Description. The Cable Matters 4-Pin Molex to SATA Power Cable Adapter is a handy addition to your toolbox when building, upgrading or repairing computers. It connects newer SATA internal hard drives, optical drives, and motherboards to a power supply with legacy LP4, 4-pin Molex connectors.
How much power does a simple Molex connector provide?
You’re talking something on the order of 110W to power 10 drives (load wattage of the WD2002FAEX for instance is 10.7W), or just about 9A on the 12V rail. Single molex is supposedly capable of handling 11A on the 12V pin.
Do you have to use Molex connectors?
Well, the answer is no due to a couple of reasons. If you look at what the peripherals use in the computer, they utilize a particular type of molex connection known as AMP/TE Mate-N-Lock connectors and other specialized kinds of connectors coined from Molex. These have male connectors in the female housing and vice versa.
Where can I buy Molex connectors?
Product Dimensions : 0.39 x 0.39 x 0.39 inches; 2.08 Ounces
Do I need a Molex connector?
Molex connectors are necessary when you don’t have any 3 pin headers left on your board to connect fans. Then you use molex connectors to connect the fans to your power supply rather than the motherboard. Subsequently, one may also ask, what is a Molex connector used for?